EVO ARC 160 PFC Inverter
c/w Case, Welding Leads & USB Operating Manual
Order Code: EA-160
List Price: £500
Discount available from your local dealer
Key Features
• Rugged, ergonomic design
• ClearVision technology
• Intelligent synergic control
• Smart Lift TIG
• Adaptable wide voltage range
• Quick factory reset
• Anti-stick, adjustable hot start and arc force
• Dedicated wireless remote control (optional)
• Remote control receiver module (optional)
• Power factor correction (PFC), generator friendly
• ABAP: Active Balancing Air Passage
• Fan on demand
• Voltage Reduction Device (VRD)
• Key power electronic component protection
• Overcurrent and overheat protection
• Complete with protective case and MMA leads
Industrial Design Highlights
Lateral Plate
Detachable for easy servicing, reinforced for enhancing the structures impact strength.
Front Grill
A sloped front grill offers a perfect balance between heat dissipation and ingress protection (IP23S).
Overall Look
Rugged, robust and industrial.
Control Panel
Slanted 45° angle for enhanced visibility and viewing comfort.
Streamlined Handle
Elevates overall aesthetics of the power source and provides a comfortable, firm and glove-friendly grip.
Advanced MMA Features
This machine features Anti-Stick technology, as well as adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.
Voltage Reduction Device
In MMA (Stick) mode VRD reduces the open-circuit voltage of the inverter.
When the welding machine is on, but not being used
(like when you’ve just finished an electrode and need to grab a new one), the VRD kicks in and lowers the voltage to a safer level (usually around 13V).
Wide Voltage Adaptation
95
265
Compatible with input power sources of AC 95-265 volts.
Power Factor Correction
Improves overall energy efficiency and allows use with AVR generators.
Overheat & Overcurrent Protection
The overheat warning light indicates that the machine has entered overheat protection and stops the welding output, the machine will re-activate once the unit has cooled down.
The overcurrent warning light indicates that the machine has entered over-current protection and stops the output. The machine can be reset by turning off and then back on.
Quick Factory Reset
Quick reset to the factory programmed settings in the event of the operator selecting an incorrect setting.
Optional Accessories
EVO Handheld Remote Control
(Wired)
Order Code: HRC-04
EVO Micro Handheld Remote Control
(Wireless)
Order Code: HRC-03
EVO Inverter Trolley
Order Code: JIT-01
On Demand
Fan
Energy Saving Environment
Friendly
50/60 Hertz
Input Power
Source
Intelligent
Synergic
Control
Wide Voltage
Adaptation
Power Factor
Correction
PFC
HD digital panel providing crisp and clear reading, visible under direct sunlight.
With 45° slanted angle for improved visibility and a 41% enhanced
viewing area compared to a vertically positioned control panel.
Intelligent Synergic Control
Getting set up for a weld has never been faster with our preset synergic programs.
Smart Lift-TIG
The trigger controlled DC Lift Arc ignition allows the arc to be started easily by simply touching the tungsten to the workpiece and lifting it up to start the arc. This stops the tungsten tip sticking to the workpiece and breaking the tip from the tungsten electrode.
Active Balancing Air Passage
-
Internal airflow is optimally diverged by a segregation structure.
-
The divergence of airflow can dissipate heat generated by power electronics in a more balanced manner.
-
The power source's overall reliability is improved with the internal structure design.