EVO MIG 160 PFC Inverter
c/w MIG Torch 3m, Regulator, Hose & Earth Lead
Order Code: EM-160C
List Price: £1200
Discount available from your local dealer
Key Features
• Rugged, ergonomic design
• ClearVision technology
• Intelligent synergic control
• Adaptable wide voltage range
• Welding engineer mode
• Smart Lift TIG
• Consistent and efficient MIG spot welding performance
• Flexible remote control solutions (optional)
• Power factor correction (PFC), generator friendly
• Quick factory reset; auto sleep mode
• Compatible with MIG digital torch and spool gun
• LED inside wire feed unit; handy accessory storage slot
• ABAP: Active Balancing Air Passage
• Fan on demand
• Voltage Reduction Device (VRD)
• Key power electronic component protection
• Overcurrent and overheat protection
Industrial Design Highlights
Lateral Plate
Detachable for easy servicing, reinforced for enhancing the structures impact strength.
Front Grill
A sloped front grill offers a perfect balance between heat dissipation and ingress protection (IP23S).
Overall Look
Rugged, robust and industrial.
Control Panel
Slanted 45° angle for enhanced visibility and viewing comfort.
Streamlined Handle
Elevates overall aesthetics of the power source and provides a comfortable, firm and glove-friendly grip.
Next generation HD digital panel providing crisp and clear reading, visible under direct sunlight.
With 45° slanted angle for improved visibility and a 41% enhanced
viewing area compared to a vertically positioned control panel.
LED Convenience Lighting
Convenient LED lighting in the wire feed cabinet to ensure maximum visibility for spool or feed roller changes, in the most demanding light conditions.
Feed Roll Storage
Handy metal feed roll storage device inside the wire feed cabinet
Spool Gun Ready
Make welding aluminium an even easier task with no need to change your existing setup. The optional 6m spool gun lets you quickly change over and get the job done with no downtime.
Wide Voltage Adaptation
95
265
Compatible with input power sources of AC 95-265 volts.
Auto Sleep Mode
The power source will enter standby mode after being idle for 10 minutes. This will reduce the power consumption to below 15W and reduce energy costs.
Overheat & Overcurrent Protection
The overheat warning light indicates that the machine has entered overheat protection and stops the welding output, the machine will re-activate once the unit has cooled down.
The overcurrent warning light indicates that the machine has entered over-current protection and stops the output. The machine can be reset by turning off and then back on.
Quick Factory Reset
Quick reset to the factory programmed settings in the event of the operator selecting an incorrect setting.
Wire Spool Size
200mm ⌀ (5Kg)
Optional Accessories
EVO Handheld Remote Control
(Wired)
Order Code: HRC-04
EVO Handheld Remote Control
(Wireless)
Order Code: HRC-02
EVO Spool On Gun
6m
Order Code: JESP-250-6
EVO Euro Style TIG Torch
4m or 8m
Order Code: WP26-12JE/WP26-25JE
Intelligent
Synergic
Control
Feed Rolls
Storage
LED Lighting
Wire Feeder
Welding
Engineer
Mode
Smart
Lift-TIG
On Demand
Fan
Energy Saving
Environment
Friendly
Input
Power Source
Wide Voltage
Adaptation
Power Factor
Correction
PFC
Intelligent Synergic Control
Getting set up for a weld has never been faster with our preset synergic programs. Simply select your wire type, wire size, gas type and material thickness, and the machine does the rest. It’ll pick the optimal settings for your weld.
Power Factor Correction (PFC)
Improves overall energy efficiency and allows use with AVR generators.
MIG Spot Welding Performance
High arc ignition response rate providing excellent consistency. Capable of delivering 60+ manual weld spots per minute with high weld joint uniformity.
Smart Lift-TIG
The trigger controlled DC Lift Arc ignition allows the arc to be started easily by simply touching the tungsten to the workpiece and lifting it up to start the arc. This stops the tungsten tip sticking to the workpiece and breaking the tip from the tungsten electrode.
Advanced MMA Features
This machine features Anti-Stick technology, as well as adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.
Voltage Reduction Device
In MMA (Stick) mode VRD reduces the open-circuit voltage of the inverter.
When the welding machine is on, but not being used (like when you’ve just finished an electrode and need to grab a new one), the VRD kicks in and lowers the voltage to
a safer level (usually around 13V).
Active Balancing Air Passage
-
Internal airflow is optimally diverged by a segregation structure.
-
The divergence of airflow can dissipate heat generated by power electronics in a more balanced manner.
-
The power source's overall reliability is improved with the internal structure design.
Energy Saving Smart Fan
The on demand Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.
Digital Torch Control Ready
With the optional 4-button digital Hard Core MIG torch you can adjust your amps, current and voltage directly from the torch. Plus, if you plug in an optional TIG torch, pressing the trigger will automatically switch you to the TIG screen mode and vice versa.
Welding Engineer Mode
Provides access to adjust in-depth parameters, allowing greater freedom in parameter customisation.
Generator Friendly
The EVO MIG 160 PFC inverter can be used with an AVR (Automatic Voltage Regulator) type power generator.
Recommended size is 4.5 kVA (AC 115V) and 6.5 kVA (AC 230V).
Technical Data
Sales Leaflet PDF
Operator Manual PDF
MIG Welding Guide PDF
