EVO TIG 200P AC/DC PFC Inverter
c/w TIG Torch 4m, Regulator, Hose & Lead Set
Order Code: ET-200PACDC
List Price: £1750
Discount available from your local dealer
Key Features
-
Rugged, ergonomic design
-
ClearVision technology
-
Adaptable wide voltage range
-
HF stabilising technology
-
Dash-Arc
-
Smart Lift TIG
-
Full featured pulse TIG parameters
-
Multiple AC waveforms
-
Mixed waveform, mixed waveform frequency, mixed waveform duty cycle
-
Flexible remote control solutions (optional)
-
Power factor correction (PFC), generator friendly
-
Quick factory reset; auto sleep mode
-
Water cooled option available
-
ABAP: Active Balancing Air Passage
-
Smart gas for optimised shielding gas consumption
-
On demand fan
-
Voltage Reduction Device (VRD)
-
Key power electronic component protection
-
Overcurrent and overheat protection
-
TFT screen (optional)
Industrial Design Highlights
Overall Look
Rugged, robust and industrial.
Control Panel
Slanted 45° angle for enhanced visibility and viewing comfort.
Streamlined Handle
Elevates overall aesthetics of the power source and provides a comfortable, firm and glove-friendly grip.
Front Grill
A sloped front grill offers a perfect balance between heat dissipation and ingress protection (IP23S).
Lateral Plate
Detachable for easy servicing, reinforced for enhancing the structures impact strength.
Multiple AC Waveforms
Customise your aluminium welds. Switch between Sine, Square, and Triangular waves to change the arc characteristics, bead profile, and penetration to suit
your weld.
Square Wave
This provides fast transitions which provide a responsive and dynamic arc.
The fast transitions eliminate the need for continuous HF. The focused arc provides good directional control. Square wave offers more power and penetration, giving fast puddle freezing along with deep penetration and fast travel speeds.
Triangular Wave
The triangular wave provides the required peak amperage but the waveform shape has the effect of reducing the heat input. This reduction in heat input makes it particularly suited to thin material welding. Triangle wave is ideally suited to thinner materials as it reduces the heat input especially in vertical or overhead joints and require to have the puddle freeze quickly!
It also allows for faster travel speeds.
Sine Wave
The sine wave gives the operator a softer feel arc similar to that of the older conventional power source. The arc tends to be much wider than the square wave arc. The sine wave AC waveform is like the older transformer type TIG welding machines which mimic’s the AC TIG welding performance of ‘transformer’ type machines for that similar traditional arc performance.
Next generation HD digital panel providing crisp and clear reading, visible under direct sunlight.
With 45° slanted angle for improved visibility and a 41% enhanced
viewing area compared to a vertically positioned control panel.
Dash-Arc
Dash-Arc technology for HF TIG. Delivers 99+ % arc striking success rate, high consistency and high ignition response rate (50-60ms).
Smart Gas
Automatic post flow time adjustment for TIG welding according to actual welding current and time, etc. Reduces shielding gas consumption up to 40% compared to conventional products.
Wide Voltage Adaptation
95
265
Compatible with input power sources of AC 95-265 volts.
Auto Sleep Mode
The power source will enter standby mode after being idle for 10 minutes. This will reduce the power consumption to below 15W and reduce energy costs.
Overheat & Overcurrent Protection
The overheat warning light indicates that the machine has entered overheat protection and stops the welding output, the machine will re-activate once the unit has cooled down.
The overcurrent warning light indicates that the machine has entered over-current protection and stops the output. The machine can be reset by turning off and then back on.
HF Stabilising Technology
Provides stable HF oscillation regardless of input voltage stability.
Generator Friendly
The EVO TIG 200P AC/DC PFC inverter can be used with an AVR (Automatic Voltage Regulator) type power generator.
Recommended size is 5 kVA (AC 115V) and 7 kVA (AC 230V).
Optional Accessories
EVO Handheld Remote Control
(Wired)
Order Code: HRC-04
EVO Handheld Remote Control
(Wireless)
Order Code: HRC-02
EVO Foot Pedal Control
(Wired)
Order Code: FRC-01
EVO Foot Pedal Control
(Wireless)
Order Code: FRC-02
EVO Inverter Trolley
Order Code: JIT-01
EVO Water Cooler
Order Code: LC-30
EVO TFT (TIG) Screen
Order Code: TFT-ET-200PACDC
Smart
Lift-TIG
Dash-Arc
for HF TIG
Smart Gas
HF Stabilising
Technology
For AC/DC
On Demand
Fan
Energy Saving
Environment
Friendly
Input
Power Source
Wide Voltage
Adaptation
Power Factor
Correction
PFC
Mixed TIG Flexibility
Option to mix AC & DC waveforms, waveform frequency and waveform duty cycles. Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC in one weld. Providing faster welding speeds, better penetration, a faster weld puddle on cold workpieces, allowing you to weld thicker materials.
Pulse TIG
Minimise the heat input without compromising on penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc.
Intelligent Synergic Control
Getting set up for a weld has never been faster with our preset synergic programs. Simply select your wire type, wire size, gas type and material thickness, and the machine does the rest. It’ll pick the optimal settings for your weld.
Power Factor Correction (PFC)
Improves overall energy efficiency and allows use with AVR generators.
Smart Lift-TIG
The trigger controlled DC Lift Arc ignition allows the arc to be started easily by simply touching the tungsten to the workpiece and lifting it up to start the arc. This stops the tungsten tip sticking to the workpiece and breaking the tip from the tungsten electrode.
Advanced MMA Features
This machine features Anti-Stick technology, as well as adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.
Voltage Reduction Device
In MMA (Stick) mode VRD reduces the open-circuit voltage of the inverter.
When the welding machine is on, but not being used (like when you’ve just finished an electrode and need to grab a new one), the VRD kicks in and lowers the voltage to
a safer level (usually around 13V).
Active Balancing Air Passage
-
Internal airflow is optimally diverged by a segregation structure.
-
The divergence of airflow can dissipate heat generated by power electronics in a more balanced manner.
-
The power source's overall reliability is improved with the internal structure design.
Energy Saving Smart Fan
The on demand Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.
Quick Factory Reset
Quick reset to the factory programmed settings in the event of the operator selecting an incorrect setting.
Optional TFT Screen
Order Code:
TFT-ET-200PACDC
The colour LCD screen offers the operator a wealth of information including operation modes, additional storage of setup, error diagnostic codes and consumable guides.
Technical Data
Sales Leaflet PDF
Operator Manual PDF
ClearVision Screen Version
TFT-LCD Screen Version
TIG Welding Guide PDF
